Your Anker mouse is not working properly then you should try to follow some simple steps for your ergonomic mouse. Maybe you have the best vertical mouse but unable to experience it.

If your Anker mouse is not interacting with the screen of your system, or you are unable to see a red light on the mouse top. You should make sure that your mouse is turned on.

Light Is Not On At The Top Of Anker Mouse

You can clearly see a red light producing from the button located on the top of the best wireless Anker mouse. If the red light is not blinking, it means that your Anker vertical mouse is still off. You have to turn it on.

To fix this problem you need to restart your computer. After restarting your computer, still, you are having the same problem then it might be possible that the battery is dead.

Dead Battery

The most definite reason that your Anker mouse is not turning on is dead batteries. AA batteries are dead inside your ergonomic mouse and you ought to replace them.

Mouse Interacting But Red Light In Not Showing

As the previous issue regarding your Anker mouse was not showing red light or even not interacting with the computer. Now you may be able to interact with your computer but the red light is still absent from sight.

Restart Computer

Restarting any device can help you out in solving lots of recurring issues. You might be thinking that the problem is with your Anker mouse then how restarting the system can help.

Well, the mouse is connected with your computer system through the USB port and restarting the computer will restart your Anker vertical mouse also.

Move on to the next step if your problem still exists.

Change the LED

Maybe the problem is not with your Ergonomic mouse, but the LED light is making issues. The light source of the Anker mouse needs to replace as per instructions in the guide.

Mouse Interacting But The Top Button Is Not Working

The red light is enlightening the DPI button, which is called Dots Per Inch. With reference to the movement of the Anker mouse on the screen, the DPI button changes the sensitivity.

It can be set on three modes:  slow, medium, and fast mode. The DPI button of your Anker mouse might be broken if the mouse is not working faster or slower as you click.

Restart Computer

You already know that restarting your system solves most of the issues. Therefore, you have to restart your computer to restart your Anker mouse as well. Since the mouse is connected with your computer via USB port.

If your problem of DPI button is still not solved then you should continue to the next step.

Change DPI Button

It might be possible that your DPI button is broken if it is not working after restarting your system. In this case, you have to replace the DPI button with reference to the instructional guide. It will surely solve your problem.

The mouse is not interacting with Computer.

Anker mouse is not working on the screen of the computer by moving it on the surface.

Turn on the mouse

Make sure that your mouse is turned on by referring to the troubleshooting procedure.

Restart the computer

Restarting can solve the problems, but if your problem exists and your Anker vertical mouse is not moving on the screen then you should continue to the next step.

Anker Vertical Ergonomic Optical Mouse Review 

Clean The Bottom Surface Of The Mouse

Your Ergonomic mouse might be polluted with dust. It might be possible that the sensor at the bottom of the mouse is blocked with dirt. It also affects the performance of the mouse as the mouse troubles in moving on any surface.

Clean the surface with q-tip by scrubbing to remove the debris from the bottom of the Ergonomic mouse.

Broken Sensor

The sensor of the Anker vertical mouse can be broken and luckily, it can be replaced. Follow the instructions to change the mouse sensor accordingly.

Bad USB Connector

After trying all the possible methods, you have to check the USB connector. It can be faulty! Every mouse has different specifications and basis on it the drivers are also different.

Your computer system downloads the drivers automatically when you plug the USB with it. Downloading or updating the drivers again will help you out in connecting successfully with your system.

Clean the USB ports by using q-tip at the chip entrance. If you found that the USB port is broken then you can replace it with a new chip.

You will definitely resolve your issue that you are dealing with your Ergonomic mouse. Keep yourself updated and try new methods.

Are you tired of repeatedly trying to connect your Logitech M720 Triathlon to the Unifying Receiver? Well, you do not need to exhaust yourself as you can easily sort out the issue with simple steps.

Logitech M720 Triathlon

Luckily, you can pair your Unifying receiver with up to six Unifying devices at a time. To determine whether your Logitech devices are really Unifying, you can check it by seeing this logo:   

Two types of methods can help you out to connect your Logitech M720 Triathlon mouse with the Unifying receiver.

• Logitech Options Software
• Logitech Unifying Software

Let us explore these methods one by one.

Logitech Triathlon M720 Review 

Using Logitech Options Software

You can easily connect your Unifying receiver of the best wireless mouse Logitech M720 Triathlon by simply using the Logitech Options Software. If you don’t have this software installed then the first step is to download and install it.

To launch the Logitech Options Software you need;

Windows: Start=>Programs=>Logitech=>Logitech Options

Mac: Macintosh HD=>Applications=>Logitech Options

Click on Add Device, if you are pairing your Unifying receiver for the first time with your device.

If you have more than one device to be paired, click on your Devices. Then click on Add Devices that you can see in the bottom right corner of the window.

Click on Add Unifying device on the Add a device window that you can see under the Set up a Unifying device.

On the Logitech M720 Triathlon mouse, choose the channel that you want to pair with.

By pressing the adjoining button (1, 2, or 3) multiple times you can select the channel. Keep on pressing until the channel number is lit. Hold down the button once it is lit and keep trying until the light flashes speedily.

Now you ought to follow all the instructions that you see on-screen to turn off or on your device.

Once your pairing was successfully done you will see a confirmation window of Pairing completed.

Hit the Done button located at the bottom right corner to shut the window. Before the device turns off, the channel light will turn firmly for a few seconds.

Using the Logitech Unifying Software

To launch the Logitech Unifying Software you need:

Windows: Start=>Programs=>Logitech=>Unifying=>Logitech Unifying Software

Macintosh: Application=>Utilities=>Logitech Unifying Software

Click on Next, at the lower bottom page of the Welcome screen.

Repeat the process as you did in the above method. Select the channels that you want to pair. On your Logitech M720 Triathlon mouse press the (1, 2, or 3) buttons to connect unless and until the channel number start lightening.

While seeing the “Restart the device…” screen you have to follow all the instructions to turn off or on your device.

We have detected your…” is a confirmation message that you will see when your device is successfully detected by your system.

If you are using;

Keyboard: In the field, type a test message to make sure that it is working properly.

Mouse: If you are using a mouse then move around to see if the cursor is moving with it.

Click on Yes and Next if your device is successfully connected.

Wait a minute if your device does not respond the right way. Click on the option No and then Next if your device is still not paired. By doing this you will restart from the first step again.

Click on the Finish button to leave the Logitech unifying Software window. Your device should now be definitely connected.

Boost up your work productivity with the help of Logitech MX Ergo wireless trackball mouse. If you are really going through with Logitech MX Ergo wireless trackball mouse error in connection. You can sort out this issue with downloading Logitech Options.

Logitech MX Ergo

Your trackball mouse problems occur when the software is not installed correctly or is not up to date. Maybe your Logitech trackball mouse is not working fine because of poor connection.

You ought to download Logitech Options to experience the most of the MX Ergo wireless mouse features. As Logitech MX Ergo is a multi-device trackball that you experience while working with a wireless trackball mouse.

• With your first exposure, you need to turn on your MX Ergo trackball for functioning.
• Now hold by pressing one of the two Easy-Switch ™ buttons that you can see at the top of the mouse.
• To make sure that your device is paired successfully with your laptop or PC, below the scroll wheel you will find buttons to press for three seconds.
• To connect your computer and Logitech MX Ergo wireless trackball mouse, you have to plug the Unifying receiver with your USB port. You can also use the already existing Unifying receiver or can connect with Bluetooth device.

Now directly open the Logitech Options, and choose Logitech MX Ergo wireless trackball mouse. By choosing the MX Ergo multi-device trackball you can discover all the possibilities in MX Ergo trackball.

Adjusting Metal Crux

The Logitech MX Ergo wireless trackball mouse is uniquely made with an adjustable hinge. It helps you to increase from 0 to 20-degree angle tilting. It helps to reduce the wrist pain as improve the wrist posture by tilting to 20 degrees.

The unique design allows you to grip tightly on the wireless trackball mouse.  Because the shape gives access to your hand with a full palm and finger support to reduce pain in your wrist. There is a rubber coating over the top of the mouse body that is soft enough to make sure that you have a smooth and comfortable grip.

You can easily switch between two angles that are 0 to 20 degrees by pressing the side of the device.

Well the Logitech MX Ergo wireless trackball mouse has many appealing features, such as;

1. Adjustable angle
2. A micro USB charging port
3. Back and forward buttons
4. Accuracy mode button:

It can change the cursor velocity and the precision for most favorable control instantly. It can be done with just a press of a button. When the precision is successfully activated, you will see an LED light illuminates.

5. Precision Scroll Wheel with tilt:

You can avail the opportunity by using the precision scroll wheel tilt to make the controls quick and easy for you. With your favorable shortcuts and middle click, you can direct it.

Logitech MX Ergo Wireless Review 

6. Easy-Switch Connect Button:

Directly switch between two desktop computers by using two Easy-Switch buttons without and re-pairing.

7. Power LED

Rechargeable battery:

Up to four months with a full charge, your battery can survive and can be rechargeable. With the one-minute charge, you can have a full day working of Logitech MX Ergo wireless trackball mouse.

Flow-enabled:

With flow technology now, you can easily copy/paste any text, images or files between computers.

Are you trying to solve the Logitech M330 silent plus mouse not working? No worries guys! Now you can try the best solution for solving your best wireless Logitech silent mouse problem in no time.

Logitech M330 Silent Plus Mouse

A lost connection can be a troublesome issue when your Logitech M330 silent plus wireless mouse not working on the laptop. Well, your Logitech silent mouse and your laptop or desktop PC can be lost their connection for different reasons, such as:

1. Might be suffering from low battery
2. Might be the mouse is using on metal surfaces
3. (RF) Radio Frequency intrusion from different other wireless devices, such as:

• Monitors
• Computer power supplies
• Wireless speakers
• Cell phones
• Garage door openers

 Before You Try to Reconnect Your Mouse

You can seek out to solve the above problems before you try any other fixing to make your Logitech M330 silent plus mouse not working.

• Turn on your computer.
• Put new batteries into your mouse and you can see instructions for replacing the batteries.
• In a working USB port that you can find on your computer, you ought to plug the receiver directly and safely.
• Turn on the Logitech m330 by using the power switch on the bottom.
• On the mouse, the power indicator must be green.

Reconnect your mouse

To reconnect your Logitech m330 silent plus with your Windows computer, you have to;

• Download the Logitech Connection Utility and run it.
• Click Next on the Logitech Connection Utility Welcome screen to continue.

• You ought to follow all the details given in instructions to turn off or on your message.

• You will get a verification message when the system detected your mouse.

• Click on Next to confirm that the mouse is working properly.
• Hit Finish button and you will get out of the window of Connection Utility.

This was a simple and quick method to solve your Logitech M330 silent plus mouse not working on your laptop.

If you still have not solved your problem then you can restart your computer and repeating the reconnection process will definitely work.

Logitech M330 Silent Plus Review 

Logitech M330 Sudden Stops Working

Try these ideas if your Logitech silent mouse stops working suddenly and you have to keep connecting with USB receiver repeatedly.

• It is recommended that to keep your other electrical items away at least 8 inches that are 20 cm from the mouse. The host device also needs to stay away from all the other electronic devices.
• Place the mouse closer to the USB receiver.
• You can also try to check by moving the receiver to a different USB port.

Most of the times you like to use a mouse while working on their laptops as compared to using a touchpad. Bluetooth mouse is the best wireless mouse and can be a handy tool for you but at the same time, different problems reported such as Microsoft Bluetooth mouse not working.

Microsoft Bluetooth mouse not working especially when you are working with Windows 10, and for this reason, lots of solutions are here. When you are facing the Microsoft Bluetooth mouse not working issue, you can also have some other related issues such as;

• Bluetooth is paired but unable to connect with Windows 10.
• Bluetooth devices such as Bluetooth mouse or keyboard are not working properly on Windows 10.
• Bluetooth is not able to detect devices on Windows 10.
• Checking Bluetooth radio status error.

How to fix Microsoft Bluetooth Mouse Not Working error

Fix#1: Changing Power and Sleep Settings

To solve the Microsoft Bluetooth mouse not working issue you can change the power and sleep settings. Some of the users reported this solution to disable the option of “Stay connected to Wi-Fi while asleep” in the sleep settings.

By doing this procedure you can solve Microsoft Bluetooth mouse not working error and other connectivity problems as well. You can perform this method by following the below steps;

•  At the first step, go to Settings and open System.
• Now go to the Power and Sleep tab.
• You have to uncheck both options of “On battery power stay connected to Wi-Fi while asleep”, and “Stay connected to Wi-Fi while asleep, when plugged-in”.

That’s it!

Fix#2: Update Bluetooth Driver

If you are not satisfied with the above solution, then you can try this one. This is the most common solution to resolve lots of issues on Windows 10 or older versions.

It can be possible that the drivers of your Microsoft Bluetooth mobile mouse 3600 needed to be updated. For this reason, your Bluetooth mouse cannot be compatible with your Windows 10. You have to update your drivers to make them attuned with the system.

Follow these steps to update the drivers to solve Microsoft Bluetooth mouse not working;

• In the search bar on your Window screen, type devicemanager to open the Device Manager window.
• Now look for the Bluetooth mouse that you want to get paired with, and right-click on it.
• Go to the Update driver software.
• The wizard will start scanning the whole system and will apply all the updates.
• Now you have to restart your computer and try to reconnect your Microsoft Bluetooth mobile mouse 3600.
• You must be very careful while installing the new drivers because wrong drivers can destroy your whole system.

Fix#3: Checking if the Bluetooth Service is Running

Your Microsoft Bluetooth mobile mouse 3600 stops working and you are trying every solution. this method might work for you if you are continuously failing in connecting the mouse. Every system needs proper tools to work smoothly. In the same way, the Bluetooth device also needed to be processed correctly in your system. You will not be able to use the Bluetooth devices if it is disabled.

By following the below steps you can check the proper services;

• To open the elevated Run command line you have to press Windows key + R at a time.
• Type services.msc in the command line and press the enter button on your keypad.
• You will see a new window opening in front of you, where you should navigate to Bluetooth support service.
• It must be set to start, and if it is not you can do it with right click and choose Start.

Fix#4: Troubleshooting the System

There might be troubleshooting issues with your system and that’s why your Microsoft Bluetooth mouse not working is happening again and again.

With your Windows 10, you can try a new tool for troubleshooting your system. Definitely, you can solve lots of major issues related to your system and one of them can be your Microsoft Bluetooth mouse not working.

Below is the simple steps to run the Bluetooth troubleshooting problem;

• Go to the settings.
• Select the Update & Security option.
• Click on Troubleshoot from the left pane of the page.
• Now, it is alright if set to Started. You can even select Start by right click.

Fix#5: Restarting the Bluetooth Mouse

Sometimes when no solution is working, then starting over is the best option for you. When you are failed to solve the Microsoft Bluetooth mouse not working issue, you must try this.

Microsoft Bluetooth Mobile Mouse 3600 Review 

Follow these steps to reset your mouse:

• In the search bar, type control panel and open it.
• Now go to the Hardware and Sound option and select Bluetooth Devices.
• Click on your Bluetooth mouse and choose Remove.
• Tap on Add and reset the device. Find and select the checkbox of the My device is set up and ready to be found and click on Next.
• If you are unable to find the device then restart again and find the device. Click on the Next option.
• You will get all the instructions for installation in the wizard.

Note that the device must be turned on and you are not required to replace the batteries. Your device must be connected properly to the system and it must be visible.

Fix# 6: Monitor Mouse Frequency

Unquestionably, wireless mice frequencies are often at risk to disruptions. Maybe it is the real problem with your Microsoft Bluetooth mobile mouse 3600.

Well, you can change the frequency of your mouse by opening the utility software of your mouse. You can change the mouse frequency from 500 to 250Hz.

That’s it! I think at least one solution will really help you out in solving the Microsoft Bluetooth mouse not working issue with your Window 10.